高通平台点亮屏幕添加新屏幕
Qualcomm - Android9.0
作者：曉之以礼
一、.XML Configure
1.一些主要的配置
"1.0"
st7703-720p-video
st7703_720p_video
0x29, 0x01, 0x00, 0x00, 0x00 = REGISTER
PayloadSize = Number+1
Payload = CMD,DATA,DATA,…
size CMD DATA
| | |
0x29, 0x01, 0x00, 0x00, 0x00, 0x02, 0xFF, 0xEE,
根据Excel2016工具计算
"0x76, 0x18, 0x10, 0x00, 0x3A, 0x3E, 0x14, 0x1C, 0x12, 0x03, 0x04, 0x00"
2.生成设备树文件和头文件
#perl parser.pl .xml panel
3.把文件移到相应的位置
kernel/msm-4.9/arch/arm64/boot/dts/qcom/XXXX.dtsi
bootable/bootloader/lk/dev/gcdb/display/include/XXXX.h
二、Configure Kernel
1.Include .dtsi files.
kernel/msm-4.9/arch/arm64/boot/dts/qcom/msm8953-mdss-panels.dtsi
+#include "dsi-panel-st7703-720p-video.dtsi"
......
+&dsi_st7703_720p_video {
+ qcom,mdss-dsi-panel-timings-phy-v2 = [
+ 1e 1a 04 05 02 03 04 a0 /*Data 0*/
+ 1e 1a 04 05 02 03 04 a0 /*Data 1*/
+ 1e 1a 04 05 02 03 04 a0 /*Data 2*/
+ 1e 1a 04 05 02 03 04 a0 /*Data 3*/
+ 1e 0d 03 05 02 03 04 a0]; /*CLK lane*/
+};
kernel/msm-4.9/arch/arm64/boot/dts/qcom/msm8953-pmi632-panel-camera.dtsi
&mdss_dsi0 {
qcom,dsi-pref-prim-pan = ;
pinctrl-names = "mdss_default", "mdss_sleep";
pinctrl-0 = ;
pinctrl-1 = ;
qcom,platform-te-gpio = ;
qcom,platform-reset-gpio = ;
qcom,platform-bklight-en-gpio = ;
//qcom,platform-enable-gpio = ;
};
2.Configure the Backlight
kernel/msm-4.9/arch/arm64/boot/dts/qcom/msm8953-pmi632-panel-camera.dtsi
&dsi_st7703_720p_video {
qcom,panel-supply-entries = ;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
qcom,mdss-dsi-bl-pmic-pwm-frequency = ;
qcom,mdss-dsi-bl-pmic-bank-select = ;
qcom,mdss-dsi-bl-pwm-pmi;
pwms = ;
qcom,mdss-dsi-pwm-gpio = ;
pinctrl-names = "default";
pinctrl-0 = ;
//qcom,mdss-dsi-pwm-gpio = ;
};
If PWM backlight control is used on DSI0, please disable the DSI1 bridge.
&soc {
//rid:add dsi1 bridge for dual mipi dsi
qcom,dsi1_bridge {
- compatible = "qcom,dsi1_bridge";
+ //compatible = "qcom,dsi1_bridge";
instance_id = ;
mdss-dsi-bl-pmic-pwm-frequency = ;
mdss-dsi-bl-pmic-bank-select = ;
三、Configure LK
1Add several parameters to panel_hx8394f_720p_video.h to avoid compiling error
/*---------------------------------------------------------------------------*/
/* Panel configuration */
/*---------------------------------------------------------------------------*/
static struct panel_config st7703_720p_video_panel_data = {
"qcom,mdss_dsi_st7703_720p_video", "dsi:0:", "qcom,mdss-dsi-panel",
10, 0, "DISPLAY_1", 0, 0, 60, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL
};
/*---------------------------------------------------------------------------*/
/* Lane configuration */
/*---------------------------------------------------------------------------*/
static struct lane_configuration st7703_720p_video_lane_config = {
4, 0, 1, 1, 1, 1, 0
};
2.Add the DSI PHY 2.0.0 timing config mentioned in
panel_hx8394f_720p_video.h.
static const uint32_t st7703_720p_video_timings[] = {
0x76, 0x18, 0x10, 0x00, 0x3A, 0x3E, 0x14, 0x1C, 0x12, 0x03, 0x04, 0x00
};
/*-->add by rid, only for msm8953<--*/
static const uint32_t st7703_720p_14nm_video_timings[] = {
0x1e, 0x1a, 0x4, 0x5, 0x2, 0x3, 0x4, 0xa0,
0x1e, 0x1a, 0x4, 0x5, 0x2, 0x3, 0x4, 0xa0,
0x1e, 0x1a, 0x4, 0x5, 0x2, 0x3, 0x4, 0xa0,
0x1e, 0x1a, 0x4, 0x5, 0x2, 0x3, 0x4, 0xa0,
0x1e, 0x0d, 0x3, 0x5, 0x2, 0x3, 0x4, 0xa0,
};
static struct panel_timing st7703_720p_video_timing_info = {
0, 4, 0x04, 0x19
};
3 Add a new panel.
bootable/bootloader/lk/target/msm8953/oem_panel.c
+#include "include/panel_st7703_720p_video.h"
/*---------------------------------------------------------------------------*/
/* static panel selection variable */
@@ -62,6 +63,7 @@
static uint32_t auto_pan_loop = 0;
enum {
+ ST7703_720P_VIDEO_PANEL,
ILI9881D_720P_VIDEO_PANEL,
HX8394F_720P_VIDEO_PANEL,
ILI9881C_720P_VIDEO_PANEL,
@@ -80,6 +82,7 @@ enum {
* Any panel in this list can be selected using fastboot oem command.
*/
static struct panel_list supp_panels[] = {
+ {"st7703_720p_video", ST7703_720P_VIDEO_PANEL},
{"ili9881d_720p_video", ILI9881D_720P_VIDEO_PANEL},
{"hx8394f_720p_video", HX8394F_720P_VIDEO_PANEL},
{"ili9881c_720p_video", ILI9881C_720P_VIDEO_PANEL},
@@ -127,6 +130,36 @@ static int init_panel_data(struct panel_struct *panelstruct,
int pan_type = PANEL_TYPE_DSI;
switch (panel_id) {
+ case ST7703_720P_VIDEO_PANEL:
+ panelstruct->paneldata = &st7703_720p_video_panel_data;
+ panelstruct->paneldata->panel_with_enable_gpio = 0;
+ panelstruct->panelres = &st7703_720p_video_panel_res;
+ panelstruct->color = &st7703_720p_video_color;
+ panelstruct->videopanel = &st7703_720p_video_video_panel;
+ panelstruct->commandpanel = &st7703_720p_video_command_panel;
+ panelstruct->state = &st7703_720p_video_state;
+ panelstruct->laneconfig = &st7703_720p_video_lane_config;
+ panelstruct->paneltiminginfo
+ = &st7703_720p_video_timing_info;
+ panelstruct->panelresetseq
+ = &st7703_720p_video_reset_seq;
+ panelstruct->backlightinfo = &st7703_720p_video_backlight;
+ pinfo->mipi.panel_on_cmds
+ = st7703_720p_video_on_command;
+ /*pinfo->mipi.panel_read_cmds
+ = &st7703_720p_read_id_command;*/
+ pinfo->mipi.num_of_panel_on_cmds
+ = ST7703_720P_VIDEO_ON_COMMAND;
+ pinfo->mipi.panel_off_cmds
+ = st7703_720p_video_off_command;
+ pinfo->mipi.num_of_panel_off_cmds
+ = ST7703_720P_VIDEO_OFF_COMMAND;
+ memcpy(phy_db->timing,
+ st7703_720p_14nm_video_timings,
+ MAX_TIMING_CONFIG * sizeof(uint32_t));
+ pinfo->mipi.signature = 0x7713;
+ break;
+
case ILI9881D_720P_VIDEO_PANEL:
panelstruct->paneldata = &ili9881d_720p_video_panel_data;
panelstruct->paneldata->panel_with_enable_gpio = 0;
@@ -484,6 +517,12 @@ int oem_panel_select(const char *panel_name, struct panel_struct *panelstruct,
break;
}
if(auto_pan_loop == 2)
+ {
+ panel_id = ST7703_720P_VIDEO_PANEL;
+ auto_pan_loop++;
+ break;
+ }
+ if(auto_pan_loop == 3)
{
panel_id = ILI9881D_720P_VIDEO_PANEL;
break;
四、Configure Second Display
1.更改panel_st7703_720p_video.h
/*---------------------------------------------------------------------------*/
/* Panel configuration */
/*---------------------------------------------------------------------------*/
static struct panel_config st7703_720p_video_panel_data = {
"qcom,mdss_dsi_st7703_720p_video", "dsi:0:", "qcom,mdss-dsi-panel",
10, 0, "DISPLAY_1", 0, 0, 60, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, "qcom,mdss_dsi_st7703_720p_dsi1_video"
};
2.copy dsi-panel-st7703-720p-video.dtsi to dsi-panel-st7703-720p-dsi1-video.dtsi.
&mdss_mdp {
dsi_st7703_720p_dsi1_video: qcom,mdss_dsi_st7703_720p_dsi1_video {
qcom,mdss-dsi-panel-name = "st7703 720p dsi1 video mode dsi panel";
//qcom,mdss-dsi-panel-controller = ;
qcom,mdss-dsi-panel-type = "dsi_video_mode";
//qcom,mdss-dsi-panel-destination = "display_1";
qcom,mdss-dsi-panel-framerate = ;
qcom,mdss-dsi-virtual-channel-id = ;
3.msm8953-mdss-panels.dtsi
+#include "dsi-panel-st7703-720p-dsi1-video.dtsi"
......
+&dsi_st7703_720p_dsi1_video {
+ qcom,mdss-dsi-panel-timings-phy-v2 = [
+ 1e 1a 04 05 02 03 04 a0 /*Data 0*/
+ 1e 1a 04 05 02 03 04 a0 /*Data 1*/
+ 1e 1a 04 05 02 03 04 a0 /*Data 2*/
+ 1e 1a 04 05 02 03 04 a0 /*Data 3*/
+ 1e 0d 03 05 02 03 04 a0]; /*CLK lane*/
+};
4.msm8953-pmi632-panel-camera.dtsi
&mdss_dsi {
- hw-config = "dual_dsi"; //"single_dsi";
+ hw-config = "dual_dsi";
+ //"single_dsi";
};
&mdss_dsi1 {
status = "ok";
- qcom,dsi-pref-prim-pan = ;
+ qcom,dsi-pref-prim-pan = ;
pinctrl-names = "mdss_default", "mdss_sleep";
pinctrl-0 = ;
pinctrl-1 = ;
qcom,bridge-index = ;
qcom,pluggable;
- qcom,platform-te-gpio = ;
- qcom,platform-reset-gpio = ;
+ qcom,platform-te-gpio = ;
+ qcom,platform-reset-gpio = ;
// qcom,platform-bklight-en-gpio = ;
};
+&dsi_st7703_720p_dsi1_video {
+ qcom,panel-supply-entries = ;
+ qcom,dba-panel;
+ qcom,bridge-name = "dsi1-bridge";
+};
5 kernel/msm-4.9/include/uapi/video/msm_hdmi_modes.h
#define DEFAULT_VFRMT_TIMING \
{DEFAULT_VFRMT, 720/*active_h*/, 40/*front_porch_h*/, 5/*pulse_width_h*/, 60/*back_porch_h*/, false, \
1280/*active_v*/, 15/*front_porch_v*/, 3/*pulse_width_v*/, 11/*back_porch_v*/, false, \
71128/*pixel_freq/1000*/, 60000/*refresh_rate/1000*/, false, true, HDMI_RES_AR_16_9, 0}
作者：曉之以礼
